How do I factory reset my KODAK Video Monitor?

You may want to factory reset the camera to:

- Put the camera back to its default factory settings

- Troubleshoot when the camera is not working properly

To perform a factory reset of your camera:

If you have a CFH-V10

1. Make sure your camera is powered on.

2. Find a pin or small paper clip.

3. Insert the pin into the factory reset recess located above the switch on the back of the camera.

4. Press and hold for 10 seconds. The top and middle LED lights will turn off, then both flash red.

If you have a CFH-V15, CFH-V20, or CFH-BVA10

1. Make sure your camera is powered on.

2. Press and hold the factory reset button found on the side of the camera for 10 seconds. The LED light will turn off, then flash red.

You will need to set up your camera again after factory resetting it.


Please sign in to leave a comment.
Powered by Zendesk